This Is The Rcsolutions Traxxas C/ T/ E-Maxx Rear Bulkhead Red (Pair) rcs030

If you bash your T-Maxx much at all, you have probably experienced bent A-arm pins.

The lower-front arm pins are the most vulnerable. It doesn't seem to matter what material they are, even titanium pins bend.

RC Solutions bulkheads for the Traxxas T/E-Maxx solve the problem of bent lower A-arm pins with an entirely new and unique approach.

Most aftermarket manufacturers essentially replicate stock parts, problems and all. After battling bent A-arm pins for years, we designed our own bulkheads to attack the problem. Our solution is to support both ends of the lower A-arm pins, and to use extra-strong steel for the pins.

For the back bulkheads, extra material was added to support the lower pin. For the front bulkheads, a thin plate was designed to support the lower pin without interfering with the steering linkage.

In addition to extra support, we use hardened and tempered music wire for our pins.

It is so hard it can not be grooved for circlips, so the pins are held in with tiny set screws.